Rockler.com Exclusive
❈ XL Router Table Box Joint Jig
⦿ View PDF ▸ Read Instruction Manual
Now you can machine bigger box joints for large-scale projects on your router table. Build large chests, guitar amps, cabinets and more! Just use the knobs to secure the MDF base of the jig into the miter slot of your router table - the sturdy steel sled then lets you guide the workpiece past the bit with complete control.
The jig includes precision-machined aluminum indexing keys to give you air-tight joints with either 1/2'' or 3/4'' fingers.
The vertical face of the sled features two sacrificial MDF boards that securely sandwich the workpiece and provide backup support for reduced tearout. Larger pieces can be supported easily by adding a 1/2'' piece of material to the left and right side of the jig platform. The jig is easy to setup and detailed instructions are included
What You Get: |
|
| (1) MDF Base (1) 3/4" Indexing Key (1) 1/2" Indexing Key (2) #4-3/8" Screw (2) 5/16"-18 x 1/2" Bolt (2) Miter Slot Bars (2) Large Washer (2) 5-Star Knob (1) Sacrificial Front Fence (1) Sacrificial Back Fence (2) 5/32"-5/8" Screw |
(2) 5/32"-3/4" Screw (Sliding Bracket) (2) 3-Star Knob (6) Small Washer (2) 5/32-3/4" Screw (Side Sled Bracket) (2) Front Sliding Bracket (2) Side Sled Brackets (2) Corner Brackets (6) 1/4-20 x 1/2" Hex Bolt (2) 1/4-20 x 3/4" Screw (2) Handle (1) Allen Key M5 |
🌵 Search azWoodman
📌 Content © Rockler.com ~ The products on this page are available at Rockler.com.