❈ Free 75¾'' CD/DVD Tower Plans |
||
 |
☑ Materials Lists:A. CD Version1. (2) Side Panels: ¾'' x 5¼'' x 73½''2. (1) Back Panel: ¼'' x 5¾'' x 73½'' 3. (1) Top Panel: ¾'' x 5'' x 5'' 4. (1) Base Panel: ¾'' x 5'' x 5'' 5. (1) Top Molding: ¾'' x 8'' x 8'' 6. (1) Base Molding: ¾'' x 8'' x 8'' 7. (1) Base: ¾'' x 11'' x 11'' 8. (2) 6' Holder Strips B. DVD Version1. (2) Side Panels: ¾'' x 5¼'' x 73½''2. (1) Back Panel: ¼'' x 8⅛'' x 73-½'' 3. (1) Top Panel: ¾'' x 7⅝'' x 5'' 4. (1) Base Panel: ¾'' x 7⅝'' x 5'' 5. (1) Top Molding: ¾'' x 10⅝'' x 8'' 6. (1) Base Molding: ¾'' x 10⅝'' x 8'' 7. (1) Base: ¾'' x 13⅝'' x 11'' 8. (2) 6' DVD Holder Strips |
 |
☑ Instructions:
1. Cut all of the materials as listed in the materials list above. On the Side Panels (1) cut a ⅜'' wide by ¼'' deep rabbet. Fig. 1. On the Top Molding (5), Base Molding (6) and Base (7) route a decorative edge as desired.
2. Construct the main ''box'' using Side Panels (1), Back Panel (2), Top Panel (3) and Base Panel (4) as indicated in the specs at the right. Join the corner with glue and nails or plugged screws, dowels or biscuits. Apply Top Molding (5), Base Molding (6) and Base (7). Fig. 2. 3. Finish as desired. 4. Apply CD or DVD strips flush (8) with front edge. |
🌵 Search azWoodman